|
|
With this large high volume crimper the big depot or OEM assembly plant is very well equipped. With 280 tons of force and a 155 mm opening enables a wide range of crimping applications. With the TS (Touch Screen) control the functionality of the press is wide: In pre determined intervals the crimper warns you that calibration is needed. In a process using a hardened precision bar supplied with the crimper you make the calibration on site yourself. The calibration will take you about 10 seconds to perform. No training required. Automatic ferrule control. Using the wrong ferrule is a common and devastating mistake. Now this can be avoided by using the crimper to check that you have used the correct part. Control of final swaging diameter. The crimper relaxes the force on the ferrule and makes a more accurate measurement of the swaged ferrule.
TECHNICAL DATA
| Crimping range in mm |
10 - 87 mm |
| Crimping range in inches |
0,39 - 3,42 |
| Crimping force in metric tons |
280 |
| Crimping force in kN |
2800 |
| Maximum hose size in inches |
2" |
| Die Set |
H 32 |
| Maximum travel of dies in mm |
70 mm |
| Master die Diam. /Lenght in mm |
99 / 97 |
| Master die Diam. /Lenght in inches |
3,90 / 3,82 |
| Machine control |
Advanced Touch Screen control |
| Motor size in kW 3 phase |
5,5 kW |
| Motor size in HP 3 phase |
7,5 |
| Colour |
Black / Orange |
DIMENSIONS
| Depth: |
800 mm |
| Width: |
920 mm |
| Height: |
1500 mm |
DESIGNATION
Die Set
| H 32-10 |
9060-32-10 |
| H 32-12 |
9060-32-12 |
| H 32-14 |
9060-32-14 |
| H 32-16 |
9060-32-16 |
| H 32-19 |
9060-32-19 |
| H 32-22 |
9060-32-22 |
| H 32-26 |
9060-32-26 |
| H 32-30 |
9060-32-30 |
| H 32-34 |
9060-32-34 |
| H 32-39 |
9060-32-39 |
| H 32-45 |
9060-32-45 |
| H 32-51 |
9060-32-51 |
| H 32-57 |
9060-32-57 |
| H 32-63 |
9060-32-63 |
| H 32-69 |
9060-32-69 |
| H 32-74 |
9060-32-74 |
| H 32-78 |
9060-32-78 |
|